Showing all 16 results
-
-
-
-
Saybolt Viscosimeter
Consist of :
Viscosimeter 1 set
Stainless steel bath, motor stirer,
220 V-AC, Thermostat control panel,
2 tubes capacity.
Viscosimeter Tube 2 pcs
Brass, seamless, provided with tips
and tip wrench.
Tube Wrench 1 pc
T-wrench.
Pipet 1 pc
Brass with rubber bulb.
Thermometer Support 2 pcs
Alumunium plate.
Flask 2 pcs
60 ml capacity.
Funnel 1 pc
Brass, 60 angle.
Thermometer 2 pcs
ASTM 17 C, 19 to 27 deg.C
Thermometer 2 pcs
ASTM 18 C, 34 to 42 deg.C
Thermometer 2 pcs
ASTM 19 C, 49 to 57 deg.C
Thermometer 2 pcs
ASTM 20 C, 57 to 65 deg.C
Thermometer 2 pcs
ASTM 21 C, 79 to 87 deg.C
Thermometer 2 pcs
ASTM 22 C, 95 to 103 deg.C -
-
Reflux Extractor Test Set
Consist of :
Reflux ExtractorConsist of :
Glass Jar 1 pc
Pyrex, 6″ i.d approx.
Funnel 1 pc
Two wire mesh screen cone.
Condensor 1 pc
Brass / copper
Hot Plate 1 set
220 V-AC, 1000/1500 watt.
Filter Paper 1 box
Low ash filter paper.
Asbestos Wire Gauze, 15 cm x 15 cm. 1 pc -
Benkleman Beam
Consist of :
Fixed Beam 1 set
Alumunium profile frame, 3 points
adjuster, with vibrator and dial
holder. Alumunium strip arm,
1 : 2 level ratio.
Tire Gauge 1 pc
120 psi capacity.
Surface Thermometer 1 pc
Range 0 – 100 deg.C
Dial Indicator 1 pc
Range 30 x 0.01 mm. -
Distilation Of Cutback Asphalts
Consist of :
Flask 1 set
Heat resistance glass 500 ml
capacity, with side arm.
Condenser 1 set
Glass, jacketed.
Adapter 1 set
Heat resistance glass.
Shield 1 set
Metal, absestos lined, glass window.
Shield and Flask Support 1 set
Variable height adjustment.
Support and Clamp 1 set
Metal, provided with clamps.
Bunsen Burner 1 pc
Heat resource.
Asbestos Wire Gauze 1 pc
15 cm x 15 cm.
Graduated Cylinder 1 pc
100 ml capacity.
Thermometer 1 pc
ASTM 7 C, 2 to 300 deg.C -
Ductility Of Bituminous Materials Test Set
Consist of :
Ductility Mold 1 set
Form sample shape and hold end
during test, made of brass,
provided with base.
Ductility Machine 1 set
Electric 220 V-AC, stainless steel
bath, provided with temperature
control.
Pulling speed : 5 cm/min
Travel range : 150 cm. -
Flash And Fire Point By Cleveland Open Cup
Consist of :
Flash Cup 1 pc
Brass, insulation handle
Cleveland GasConsist of :
Burning Pipe 1 pc
Brass pipe, insulation handle.
Flash Cup Plate 1 pc
Steel Plate.
Support 1 pc
Adjustable height metal,
thermometer holder.
Y-Connector 1 set
Brass, provided with gas hose.
Bunsen Burner 1 pc
Heat resources.
Thermometer 1 pc
ASTM 11 C, 6 to 400 deg.C -
Loss On Heating / Thin-film Test
Consist of :
Revolving Shelf Oven ( LOKAL ) 1 set
Variable temperature oven, cast
alumunium rotating shelf, 5-6 rpm,
external electromotor drive,
220 V-AC, 1400 W.
Thin Box 12 pcs
55 mm i.d. approx, alumunium sheet,
seamless.
Thermometer 1 pc
ASTM 13 C, 155 to 170 deg.C -
Mot Straight Edge
Consist of :
Mot Straight 1 pc
Alumunium profile, 3 meter length,
with handle.
Metric Wedges 1 pc
Variable measurement from
2.5 – 7.5 cm, machine cast alumunium -
Percentage Refusal Density / PRD
Consist of :
“Percentage Refusal Density / PRD,
is defined as ratio of the initial dried density of the sample
to the final density (refusal density) expressed a percentage.”“The sample bulk density is determined
by weighing in air and water.
It is then heated in a split mould and compacted
to refusal using a vibrating hammer.
The final density is obtained by weighing in air and water.”Main Unit:
PRD Split Mould and Baseplate 1 set
Weight 10,7 kg.Accessories:
Vibrating Hammer 1 set
Suitable for compacting asphalt samples.
For 220-240 V, 50-60 Hz, 1 ph.
Weight 12,5 kg.Small Tamping Foot 102 mm diameter. 1 pc
Large Tamping Foot 146 mm Diameter 1 pc
300mm Shank, For Tamping foot 1 pc -
Softening Point Test Set
Consist of :
Shouldered Ring Assembly 1 set
Machine brass, height adjusment.
Standard Ball 2 pcs
Steel ball.
Flash Support 1 set
Mesh wire gauze variable height
adjusment.
Support Assembly 1 set
Metal, provided with thermometer
holder.
Bunsen Burner 1 pc
Heat resources.
Asbestos Wire Gauze 1 pc
15 cm x 15 cm.
Beaker Glass 1 pc
100 ml capacity.
Thermometer 1 pc
ASTM 15 C, 2 to 80 deg.C -
Specific Gravity Of Semi – Solid Bituminous Materials
Consist of :
Picnometer 1 pc
Hubbart type, 24 ml capacity.
Picnometer 1 pc
Hubbart type, 25 ml capacity.
Thermometer 1 pc
ASTM 12 C, 20 to 102 deg.C -
Water Content In Petroleum Products
Consist of :
Flask 1 pc
Heat resistance glass, 500 ml
capacity.
Water Trap 1 pc
Glass for receiving distilated water
Condenser 1 pc
Glass, jacketed.
Support Assembly 1 set
For holding apparatus assembly.
Flask Support 1 pc
Variable height adjustment.
Bunsen Burner 1 pc
Heat resource.
Asbestos Wire Gauze 1 pc
15 cm x 15 cm.